Tile Problems: Chips, Scratches and Cracks

When it comes to decorating a wall or floor space, you can’t go wrong with tiles. They’re sturdy, long-lasting, and easy to install. However, as robust as floor tiles are, like with anything, if they’re being constantly trodden up, or if dining chairs are constantly being dragged over them, you may experience the occasional chip, scratch or crack. If you do, don’t panic – we’re here to help! The guides below will help you get your wall and floor tiles looking fighting fit again!


1) How to fix small chips and scratches

The most common problem with floor tiles is small chips, which can occur around the edges. They appear more visible on darker tiles, ans they expose the lighter ceramic or porcelain underneath. There’s a simple trick for covering up tile chips – and, if you’re a woman, it’s probably sitting in your drawer right now. Nail varnish! Simply find a matching shade (or mix two colours together to find the right hue) and then paint it onto the chip! As time goes by, the nail varnish may darken. If this is the case, simply apply a little nail varnish remover, and re-apply the original mix. This tip also applies for scratches!

2) How to fix larger chips or holes

If you’ve really been giving your floor tiles a battering, and they’ve accumulated larger chips that can’t be fixed with nail varnish, then you’re going to need to up your solution. You can buy ceramic filler online. It’s similar to plasticine, and dries completely solid. It comes in a variety of different colours. Simply mix two shades together until you have a matching colour, and then work it into the chip or hole, and leave it to set. However, depending on the tile, it may be cheaper to replace the whole thing, according to the guidelines below.

3) How to fix a broken or cracked tile

If the breakage goes beyond the cosmetic appearance of the tile – if the whole piece has actually broken in two – then your best option is to replace it. We do suggest ordering 10% more than you need to allow for cut pieces and spares. So hopefully, you’ll have some spares sitting out in the shed. If you don’t, however, then Walls and Floors are your best bet for finding a match – with more than 6,000 tile designs in stock. You can either order one full-size sample tile or a whole square metre, if you’d like to be on the safe side and have plenty of spares for future usage. Once you have your replacement tile, score around the broken tile with a chisel, and prize up the broken pieces. Scrape away any residue left beneath the tile, apply fresh adhesive, and sink the new tile into the hole, before grouting the joints with a matching tile grout.

4) How to fix a loose tile

If your grout has worn thin around a particular tile, and it feels loose as you step across it, then you need to reapply both adhesive and grout. Using a chisel, prize the tile up. Work loose as much grout and adhesive from the edges and underside of the tile as you can – as well as any residue left on the flooring. Re-apply adhesive to the back of the tile, and set it back in place. Replace the grout joint around the edges of the tile.

5) Out-dated floor tiles

If your floor tiles are generally out of date, and you’re not happy of them, why not replace the whole floor? Don’t worry – that’s not as daunting a proposition as it sounds. If your floor tiles are sound and sturdy, you might not have to rip them up. You might be able to simply lay your new floor tiles over the top! Give the old layer a good scrubbing, and then leave it to completely dry. This will ensure there’s no dirt present to effect adhesion. Once it’s dry, you’re ready to apply new adhesive, and tile your new floor!


Repair Cracks and Holes in Drywall

From the smallest dent to large holes, there are several ways to fix surface defects on your walls.


Before you begin your repair, it’s important to know the utility placement in your home. Typically, electric wires are attached to wall studs. Locate the wall studs before you begin cutting, drilling or nailing drywall.

Wear protective clothing, work gloves, goggles and a dust mask when working with drywall.


Type of Fences

Great idea for new homeowners in choosing fences. Or if you simply want a change in your home, try upgrading your fence.

The type of fence you choose will not only play a key role in your home’s exterior design, but also provide one of the most important benefits of all homes; security. Privacy and security are two of the most common reasons Americans look to buy homes. A professionally installed fence gives every homeowner that true sense of home we all desire. Fencing, whether it be wood, chain link or wrought iron, will greatly affect your sense of home.

Fence Types

Before we jump into all fencing types, you have to know your options. The most popular types of fences are:

Aluminum Fencing

One of the most basic and attractive fencing types is aluminum. While it does not provide the amount of security many homeowners look for in a fence, it’s relatively maintenance free and can essentially look like any other type discussed in this article. The only maintenance will come during installation when you choose to paint and decorate it. However, along with the security, it’s not as strong as you may think and we do not recommend it for areas with severe weather.

Wood Fencing

Wood is the most popular fencing type across America. Not only does it give homeowners a sense of privacy with the height wood fencing provides, but they are also one of the more attractive options on the market. They give homeowners a warm and welcoming feeling and without the headache of breaking the bank. Beware that the height and size of your fence will greatly impact the price. The more lumber you need, the more expensive the project will be. On top of that, like all fences, they take awhile to install. Therefore, a smaller fence will clearly be cheaper than a larger one.

On the plus side, wood fences can easily last the lifetime of your home. Just like hardwood floors, the quality of your fence will greatly depend on the type of wood you choose. Needless to say, you have plenty to choose from.

PVC Fencing

Hands down, the cheapest way to fence in your yard is by using one made of PVC. These fences use PVC to replace wooden stakes and pickets, and although not nearly as sturdy, they can certainly serve their purpose. The posts are PVC sleeves that go on top of wooden posts to add stability to the fence, but also cut down on material costs by using less wood. Sometimes, the PVC stakes are attached with an adhesive to the cross bars and other times, they are fastened with screws. This type of fencing comes in a variety of different heights and colors. Because of its PVC makeup, the fence is very resistant to the elements and can last for years.

Wrought Iron Fencing

When you see homes with funky designs on top of their fences, oftentimes, those homeowners chose a wrought iron fence. While wrought iron fences are both strong and beautiful, they do require constant upkeep. If you want to maintain its beauty, wrought iron fences need to be sanded or repainted every two to three years.

Furthermore, going back to the security portion of the conversation, wrought iron fences are not popular choices for the more conservative homeowner. On top of that, wrought iron fences are custom made and therefore, will not be cheap.

Vinyl Fencing

Other than cost, vinyl fencing is elite when it comes to any other category. In fact, according to our friends at HomeAdvisor, some manufacturers claim that vinyl fences are nearly five times stronger and four times more flexible than comparable wood fences.

Vinyl fencing is maintenance free and resists paint, allowing you to easily clean graffiti or any other unwanted stains. All you will need is a hose and soap to make it look as good as new.

Installing a vinyl fence may have a higher upfront cost, but given its low maintenance costs and long lifespan, vinyl fencing is cheaper than many other fencing types.

Chain Link Fencing

Chain link fences do not add much privacy to the home, but perform the other basic functions of a fence quite well. Homeowners, as well as school administrators (very popular), will be delighted to know that they are cheap, durable and need very little maintenance (like many of the other options).

Oftentimes, homeowners add a good amount of shrubbery, flowers, vines or even privacy slates on the outside of chain link fence. Not that this would add any more security to your home, but it would add a pinch of privacy. Any homeowner can cut off their neighbors’ views with a little bit of creativity.

Electric Fencing

Invisible fences are mainly used to contain dogs through an invisible field of electricity. Typically, the installation involves placing a wire in a trench dug along the boundary the owner wishes to fence off. A wireless transmitter is also set up nearby to activate the wire. The final item in the fencing is a battery-powered collar to receive the signal from the wire. The collar warns the animal when it’s near the boundary with a sound pitched only to the animal’s hearing. If the animal tries to cross the boundary, the collar delivers an electric shock.

Bamboo Fencing

Like hardwood flooring, bamboo fencing is starting to hit its stride in the market. It can be grown naturally, so many of our green readers will be happy to hear that it’s one of the most environmentally friendly and attractive options on the market.

There are three styles for bamboo fencing: live bamboo, bamboo cane and rolled bamboo. Rolled bamboo and bamboo cane use poles linked together that are a bit sturdier than live bamboo. Live bamboo can grow up to a foot a year. We would not recommend this style in colder climates.

Farm fencing

Farm fencing certainly doesn’t apply to everyone, but it plays a vital role across America. Just like all non-farm homeowners, you have many options, such as wood, electric, barbed wire, woven or high tensile. No matter what fencing type you go with, beware that installation is expensive and timely. Given the amount of land farmers own, you can imagine the manpower it takes to put up an entire fence.


While security and privacy are certainly the top two functions of all home fences, design and creativity should never take a back seat. With all the fencing choices available, no home in America needs to sacrifice looks for security.


DIY Removal of Popcorn Ceiling

A popcorn ceiling, also known as a cottage cheese ceiling, a stucco ceiling or formally an acoustic ceiling, is a term for a spray-on or paint-on ceiling treatment. It was the standard for bedroom and residential hallway ceilings for its bright, white appearance, ability to hide imperfections, and acoustical characteristics.


Frankly, it’s pretty simple. It’s messy, but it’s simple. Let’s go over the steps.

First, you remove everything from the ceiling. We’ve already removed the fan and the AC vent in the video. If you’re not comfortable removing the fan, please consult an electrician. It’s safe, it’s not expensive and it’ll save you some heartache.

There’s only a few tools that you need in this process and that’s a:

– Garden sprayer
– Drywall knife. We prefer 6 inch.
– Some tape and plastic.

As you can see in the video, we have not taped and plasticked the wall off, or the floor. One reason is for lighting. The other is that this floor is getting removed and we’re putting tile down. We really don’t have to worry about covering it, but usually, you’ll drape the walls, drape the floor and it makes an easy clean up.

When you’re plasticking, there’s two types of tapes you can get, that’s the regular masking tape and the blue tape, painter’s tape. We prefer painter’s tape.

When painter’s tape gets wet, it doesn’t leave a residue, so you don’t have any issues later with it pulling paint of the wall, or painting over the adhesive that’s left behind. A little more money, a lot less headache.

There’s some talk about dry scrape vs. wet scraping. We wet scrape. We don’t dry scrape and here’s why:

When you dry scrape, it’s dusty. It’s messy. You don’t get that clean look that you want. We wet scrape because It’s cleaner, easier, and all you have to do is pump it up a little bit, and spray it on there.

Depending on the weather you’re in, 5 minute wait, maybe 3 minutes, and then, all you’ve got to do is scrape.

You’ll get a clean scrape with hopefully no issues. Then, once that’s all done, you really can do the whole ceiling. Just spray the whole ceiling and then do it at once.

We’ve just done this section to show you. Then, once all the popcorn has been removed from the ceiling, you roll your plastic up, haul it off to the dumpster. That’s it.

5 Tips on Raising The Value of Your Home

Having a home is a huge investment. You constantly have to pay for bills, the mortgage, renovations, and improvements. In fact, more often than not having a house is a total nightmare, especially during the selling process. However, if you know what to do you can get a great deal for your home. To sell a house the buyers have to be comfortable enough to see if they can live there, so having a presentable house is a must.

  1. The kitchen is one of the most important areas of the house. It is the first place they will see when they get up in the morning to eat breakfast, and most likely the last thing they see before they go to bed. The kitchen is where people get together for meetings, parties, and other household events. Upping the value of your kitchen can be pricey but in the end it is worth the cost. You can try upgrading the countertop, replacing cabinets, and even altering the tiles.

  1. Bathrooms are definitely one of the all-time bonuses. Having a sparkling clean sink, and a great scent in the air won’t do the trick when attracting buyers. Remodels that include a new toilet, sink, and bathtub will. You might also want to pick new tiles for the bathroom as well. Adding a small bathroom would also benefit you and the buyers likewise.

  1. Repair what is broken. There are always areas around the house that can use repairs, whether it be the backyard fences, the porch lights, or even sliding doors. Make the necessary repairs at the right time. Making repairs to random things around the house does significantly alter the value of the home itself by quite a bit. Even repairing the electrical wiring, or the roof, will raise the value of your house by a great amount.

  1. Make space. One of the most important things to do when selling a house is to make extra space. If you have a garage or attic try moving things around, or converting the attic or basement into a room. Having more space would definitely be a great attribute to both you and the buyer. A house always seems more appealing when there is more space that can be used for a bedroom or entertainment room.

  1. Install a deck. Making a deck in front or behind your home can be the difference between a win or a bust. Decks are useful and look very attractive to buyers. Decks provide a play area for kids, and a get together area for adults.

Making other small tweaks such as improving the landscape, adding new paint, and getting attractive appliances also boost your house’s value by a great amount. When it comes to your home every detail counts. As long as you make the right improvements and renovations you’ll make a good amount of profits and see a shortened selling period. Regardless, you have hundreds of options to add value to your house, so the opportunities are endless.

Monthly Household Jobs Checklist: Once-a-Month Chores to Maintain a Clean Home

Many household chores can be left for months at a time without any significant attention. Taking care of them monthly prevents build-up of dust and grime and makes the jobs quicker and easier to complete.


  1. Cleaning the oven is a job no one enjoys. It is a much less arduous task if the oven is wiped out regularly rather than leaving it for an annual attack with harsh and toxic chemical oven cleaners. To loosen any grease or spills, place a tray of water in the oven and heat until the water is steaming. Turn oven off and allow to cool until it is only warm. Remove oven shelves and other attachments if possible. Remove the tray of water. Wipe over the surface of the oven with a hot soapy cloth, rinsing regularly, until the oven is as clean as possible.
  2. Alternatively, the oven can be sprinkled with bicarb soda. Put white vinegar into a spray bottle and spray over the soda then wipe out with a wet cloth. Always make sure that gloves are used when cleaning the oven and be careful with hot water or surfaces.
  3. Clean out the dishwasher by using a commercial dishwasher cleaner designed for this purpose (not regular dishwasher detergent). There are homemade alternatives as well.
  4. Clean out the refrigerator. Turn the fridge off and remove all items. Have a large esky or cooler handy to keep milk, cold meat and similar items cold. Wipe out all shelves and surfaces with a wet cloth. If a detergent is needed, there are commercial vanilla fridge sprays available, or use hot soapy water (dishwashing detergent in water). To finish, wipe out with a cloth soaked in water with a few drops of vanilla essence. Repack all items into the fridge, making sure that all use-by dates are checked. Remember to turn the fridge back on again.


  1. Check smoke detectors monthly by pressing the test switch. Replace batteries or check the unit if the test does not work.
  2. Air doonas, quilts, pillows and blankets by hanging them outside in the fresh air if possible.
  3. Dust skirting boards with damp cloth or brush attachment on vacuum cleaner. Use the brush attachment on the vacuum cleaner to dust cornices and around the tops of doorframes.
  4. Clean bathroom exhaust fans and ceiling fans. Always take care when climbing to reach fans. It is safest to do this with someone else present to ensure that stepladders remain stable.
  5. Clear leaves from gutters. This may not need to be done as frequently where there are few trees close to the house. In autumn, some householders will need to tackle this task more frequently. If leaves and other debris do cause a problem, consider installing some form of gutter guard to prevent leaves and twigs from causing blockages.
  6. To ensure that no jobs are forgotten, prepare a household chores checklist. Each month regular weekly/fortnightly tasks will have to be performed several times, monthly chores once and less regular seasonal, bi-annual or annual chores can be distributed through the year to evenly distribute the workload.

Maintaining A Water Garden Pond

Caring for Garden Water Features to Keep Them Healthy

Although the ins and outs of water garden pond planning including layout and finding the proper balance between fish, plants, rocks and chemicals can be complicated and involve years of study, some basic knowledge of these areas will bring great satisfaction to the neophyte backyard pond owner. The result will be a beautiful, restful refuge for humans and wildlife and an increase in property value.

Create a Balanced System in a Water Garden Pond

The healthiest water garden ponds have a good balance between the numbers of fish and plants in relation to the size, shape, depth, amount of rock and whether there is a waterfall. Finding the correct pond volume, appropriate pond linersand the right pond pumpis critical to maintaining the health of a backyard garden pond or a pondless water feature. Keeping the pond clean also contributes to overall water garden pond health.

keeping the pond clean

Adding Plants to a Pond Water Feature

Plant life in garden water features is very important, not only for looks, but to help provide shade for fish and decrease the amount of available oxygen to keep algae growth to a minimum. Many kinds of beautiful plants are available and two of the least expensive are sea lettuce and water hyacinths, which bloom with lovely tiny flowers. These plants are called floaters and multiply quickly. Place one or two in your fish pond, depending on its size, and watch them carefully to keep them from taking over. Water lilies, lotuses and other ornamental water plants are also appropriate to add for highlights.

Fish Contribute to a Balanced Water Garden Pond

Depending on the size of a water garden pond, fish may be added to enhance the healthy pond system and for viewing pleasure. Add declorinator to the water the day before adding fish to remove chlorine. A waterfall or aerator is necessary for adding air to the water for fish health. To maintain fish pond algae control, allow the fish to eat the algae which they do on their own, and refrain from feeding fish food once they have become established in the garden pond.

Using Environmentally Friendly Chemicals in a Garden Pond

Keeping a healthy eco system and clear water in your water garden pond often requires the addition of a variety of products which support your pond’s overall health. There are environmentally friendly enzymes designed for different seasons of the year which help to maintain pond pH. for a wide array of water garden pond needs.

Fish Pond Algae Control and Sludge Removal

For fish pond algae control, add barley straw, which comes in a liquid or solid form. The liquid is the best and fastest working in reducing and maintaining pond algae. If string algae becomes a problem, try using one of the animal friendly algaecides. For removing decay that forms at the bottom of your pond from fish waste and other organic breakdown, there are products available for sludge removal. If pond products are not doing the job, inexpensive pond vacuums are available to remove excess gunk.

Managing Mosquitoes in a Water Garden Pond

Moving water helps prevent against mosquito infestations in backyard ponds and pondless water features. In addition to keeping the garden pond water in motion, add BT, known by its full Latin name, bacillus thurengensis. BT is an organic substance that can be added to the water to kill and prevent mosquito growth. It’s completely harmless to fish and plant life. The liquid form of BT works within hours to kill an infestation and lasts for months.

It’s time to get going for the season if you haven’t already started and prepare your backyard water garden pond for a long and healthy summer filled with flowering plants, happy fish and clean, clear water. Good luck and remember to refer to the website in the reference section for a great place to find reasonably priced products.

Tiling Tips for Homeowners

tiling tips

How to Lay Tile for a Long Lasting Installation

While there are many times when a tiling job should be completed by a professional, there are many more times when a homeowner can tackle the job himself. Those wondering how to install tile in many applications, may find that the same rules will apply for many tiling jobs and applications.

How to Measure for Tile

The most important thing for homeowners pondering a tile job is determining how much tile to purchase to complete the job. This is done through proper measuring of the space. Begin by breaking the area to be tiled into smaller pieces. For example, if a shower is being tiled, each wall will be measured separately from the next and the three areas added together. A room with bump-outs and angles in the floor will be broken into sections so that an accurate measure can be obtained. Measure each bump-out separately from the rest of the floor, so that each area measured can form as close to a rectangle as possible.

Measure each section in inches, for example a measurement of 6 feet, 4 inches should read 76 inches. When the length and width of the area have been measured multiple the numbers together and then divide by 144 to obtain the amount of square footage needed. For example, a foyer measuring 76 inches by 146 inches will come in at 77.06 square feet. Additional tile will be required for waste, cuts or breakage. If the tile pattern being considered is just straight laid squares, add 5% more tile for waste. If the pattern is on the diagonal, add 20% more for waste, due to the additional cuts. Slate tile and most other patterns will require approximately 15% more tile for waste.

How to Lay Tile

Once the tile is on site and the surface prepped for installation, the next step to take is a dry-layout or dry-fit of the tile. This is done to determine how many cuts need to be made, and where these cuts should be placed.

Always begin in the center of an installation with a full tile. This means for a floor, a full tile should be laid in the exact center of the furthest wall from the door. For a wall tile application, a full tile should be laid in the exact center of bottom of the wall. A fireplace hearth should have a full tile laid in the front center of the hearth.

install tile

Lay the adjacent tiles equally out to each side so that the tiles will be balanced when they get to the edges of a tile run. Cut any tiles to fit that require cutting, and return them to the dry-layout before continuing to ensure that the fit is correct.

If installing natural stone or a tile with a lot of variation in color from piece to piece, lay the tiles from several boxes at once, and blend the colors as they are laid. This will keep colors and patterns from bunching up in places, and will ensure an even layout.

If laying borders, decorative tiles or cut-in tiles, make all the necessary cuts and double check the dry-fit to be sure they fit together correctly. Then install the field tiles first, let them set up and then go back and install the decorative tiles into the place left. This is done so that if the decorative tiles are thinner than the field tile, they can be built up properly to ensure an even layout.

Installing Tile Patterns

multi-piece tile pattern

If installing a multi-piece tile pattern, a dry-layout is essential. Start with a full tile in one corner of the room, and work outward from there. The entire layout may need to be moved from one place to another to ensure a pleasing layout. Some patterns draw the eye in the direction the tiles move, so lay out the entire pattern, and step back to be sure that this is the desired direction. If not, re-lay the tiles before making any cuts.

Once cuts have been made, leave the tiles where they are in the pattern, taking up only a few at a time to install. This will ensure that the pattern gets installed in the same direction that it was originally laid, and that no mistakes are made.

The most important thing to do is double check each step as it is done. The old saying, “measure twice, cut once” applies to nearly every stage of a tiling job. Be absolutely certain with a dry-fit before laying a single tile, and the job should go over without a hitch.

Designing A Log Home

log home

A Guide To Designing And Creating A Custom Log Home

Home buyers interested in building a custom log home seek to mend the rustic charm and sturdy construction with the modern styles and amenities of contemporary log homes. In the first part of this series, home buyers were encouraged to research log homes for information on construction costs, log home styles and options, as well as to get financing and work with a realtor to find a vacant lot to build on. This series continues with the focus on the design aspect of building a custom log home to suit the needs of the home buyer.

Design Options For A Log Home

Once the decision has been made to move forward and build a custom log home, the next step is to visit a log home dealership. Log home dealerships supply the needs of log home owners and buyers. They offer log cabin building kits, construction plans and supplies to either build or expand an existing log home. These log cabin kits can be built alone or with hired professional. Further, log cabin kits can be customized to the buyer’s specifications. Many log home dealerships have their own building teams or can provide references of local contractors.

log cabin building

The design options for log homes are truly endless. The exterior of the home has a myriad of looks and designs that are affected by the style of log chosen as well as the tongue and groove technique used to stack the logs. Options like the pitch of the roof, size and shape of the home, use of porches, decks and verandas also contribute to the unique look of every log home. The style options for the interior of log homes are as countless as any other home. Home buyers will have an array of choices to make based on model construction plans and home styles that can be customized to fit their tastes and needs and the sales specialist will help to make the process easier.

Shop Around For The Best Deal

Still, a home buyer should not rush to make a deposit on any construction plans until they have shopped around. It is best to visit at least two log home dealerships to compare prices, construction plans and services. It is also a good idea to visit the homes of actual customers to see the quality of the home before making a final decision. If possible, take a contractor or someone familiar with log homes on these visits. Based on these visits and a comparison of the prices and options, decide to work with one of the log home dealerships.

Decide On A Construction Plan And Vacant Lot

Decide on a construction plan or cabin kit that fulfills all the needs and falls within the budget. Look at all of the options and styles offered by the log home dealership. Consider the wish list that has already been made and discuss with the sales specialist the costs and options of construction plans. Home buyers will want to know the final costs of a turn key home which includes hardwood floors, a basement, exposed beams, rafters and installation of kitchens and bathrooms.

At the same time a vacant lot should be found that best suits the needs of the log home to be built. The lot should be appropriate to fit the size and style of the home. For example, if the log home will have a walk out basement, the lot should slope away from the house as opposed to a flat lot. If possible, choose a vacant lot that is based on the construction plan to avoid altering the construction plans.

Finally, a deposit may be required on the construction plan or log cabin kit. However, the full purchase price should not be paid until after the vacant lot has been purchased. The reason for this is, the construction plan or log cabin kit chosen may not fit the lot purchased. If it does not, the construction plan or cabin kit will have to be adjusted to fit the lot. If the cabin kit or construction plan cannot be adjusted, it may be best to choose another kit or construction plan.

The process of planning to build a log home is a long and tedious one. Conducting thorough research,working with a realtor to find a vacant lot and designing a log home are all part of this process. The final step in the process is building the log home, which can be found in the third article of this three-part series.

How to Improve Downspout Drainage

Downspout is an important part of your gutter system. If poorly maintained, they can get clogged and result in some serious gutter problems. This article will focus on simple solutions for poor downspout drainage.

Add downspout extender

If your home have well-drained soil that slopes away from the foundation, then, downspout extender could be a perfect option to enhance the downspout drainage. It is advisable to use a straight, folding vinyl as an extension. Besides, accordion-style flexible extender is a great option.

Note that you can easily twist these extenders into various angles to effectively divert the water flow away from the foundation.  

Consider piping the water away from your house

If you want to divert the water far from your house, you can use French drains or other trench drainage systems. Note that French drain slopes away from the house and empties the water to an open ground away from the house.

This method of diverting water away from your house has limitations too. Since water is flowing naturally, it can erode the drain easily and make it deeper. Besides, it can interfere with your landscape and make it look ugly! To avoid such problems, you may need to fill the bottom of the French drain with gravel, lay in a flexible pipe and cover it with more gravel, then add soil. This will keep off all the problems associated with open drains.


Bury drainage pipes

Not all houses are built on sloppy areas. If your yard doesn’t slope away from the foundation, you may need to construct more complex trenches. Note that most municipal administrations don’t allow homeowners to directly attach their drainage to the storm sewer system. But you can construct an underground drainage system. Keep in mind that this will require you to dig and install pipes on the gently sloping trench.

Install diverters

You can use diverters together with the other methods. This is because diverters might not be a completed solution especially during heavy rainstorms. Note that diverters draw water from rooftops into barrels through the downspouts. Depending on the size of the barrel, diverters can be a perfect solution especially if you have a huge water tank.


Enhancing downspout drainage is simple. However, if neglected, poor downspout drainage can damage your foundation by weakening it and causing cracks. Besides, leaking basements and mold can be as a result of poor downspout drainage.